
Concrete Driveways
New driveways poured and finished to carry daily vehicle weight without cracking or sinking.
Read MoreConcrete driveways, slabs, patios & more, built right from the first pour
We supply concreters across the Mornington Peninsula, covering everything from new driveways and slabs through to patios, pool surrounds and exposed aggregate finishes. Whether you're pouring a driveway in Frankston, replacing a cracked slab in Mornington or finishing a pool surround in Mount Eliza, the approach stays the same. Proper site prep, the right reinforcement for the ground you're building on, and a finish that holds up under everyday use. We handle the project from the first measure-up through to the final clean-up, so you're not left coordinating separate trades yourself. Get in touch and we'll talk through what your project actually needs.
Fill in the form and we'll get back to you fast.

New driveways poured and finished to carry daily vehicle weight without cracking or sinking.
Read More
Slabs for sheds, alfresco areas and extensions, laid on a properly prepared and compacted base.
Read More
Outdoor patio slabs finished to suit how you actually use the space, from entertaining to everyday access.
Read More
Pool surrounds poured with the right slip resistance and drainage falls away from the water.
Read More
A textured, exposed stone finish for driveways, patios and pool areas that need extra grip.
Read More
Reinforced slabs built to carry vehicles, tools and workshop equipment without cracking under the load.
Read More
Steps and ramps poured to the right rise, fall and surface grip for safe everyday use.
Read More
A new concrete driveway needs to handle vehicle weight, drainage and years of daily use without cracking or sinking. We prepare and compact the base properly, then add the reinforcement the ground actually needs before pouring. You can choose a plain or broom finish for a straightforward, practical driveway, or step up to an exposed aggregate finish for extra grip and a different look. Control joints are placed to manage the concrete as it cures, so the driveway settles evenly instead of cracking in random spots.
Get A Quote
Whether it's a shed base, an extension or a standalone slab, the same rules apply. The base needs to be excavated and compacted correctly, reinforcement placed to suit the load the slab will carry, and the concrete finished flat and level. We size and reinforce every slab for what's actually going on top of it.
Get A Quote
A patio gets walked on, sat on and lived on, so the finish matters as much as the base underneath it. We grade the slab away from the house for proper drainage and finish the surface to suit how you'll use the space, from a smooth broom finish to a textured exposed aggregate look.
Get A Quote
Pool surrounds need to stay slip resistant when wet and drain properly so water doesn't pool against the coping or track back toward the pool. We finish these areas with that in mind, not just as an afterthought once the pool itself is in.
Get A Quote
Exposed aggregate is a concrete finish where the surface is treated to reveal the stone underneath, giving a textured, non-slip surface that suits driveways, patios and pool surrounds. It costs more attention during the pour and the finishing stage than a standard broom finish, and we treat it as its own process rather than a standard pour with an extra step.
Get A Quote
A garage slab carries more concentrated weight than a driveway in some spots, especially under vehicle jacks, workbenches or heavy equipment. We reinforce and finish garage slabs to handle that load, with a level surface that doesn't pond water near the door.
Get A Quote
Steps and ramps need the rise, the fall and the surface finish to be right, since these are the areas people are most likely to slip if the grade or the texture is off. We set these out properly before pouring, so the finished steps or ramp are safe to use every day.
Get A Quote
Driveways
Driveways
Slabs
Patios
Pool Surrounds
Exposed Aggregate
Garage Slabs
Steps & RampsWe look at the site, talk through what you need, and give you a clear, itemised quote before anything is booked in.
Site prep, formwork, reinforcement, the pour and the finish are handled by the same team, with clear communication about timing and access along the way.
We'll tell you exactly how long to leave it before walking on it or driving on it, so there's no guesswork.
Before any work starts, we walk you through exactly what's covered, from site prep to the final finish. If something outside that scope comes up once we're on site, we tell you before doing it, not after.
The Peninsula's clay-heavy soil and coastal conditions mean the base prep and reinforcement matter more than on a straightforward suburban block. We adjust the base, the reinforcement and the drainage falls to suit the site instead of using the same approach everywhere.
Site prep, formwork, reinforcement, the pour and the final finish are handled by the same team, so nothing gets lost between separate trades. You get one point of contact for the whole job.
We plan the pour and the curing time around how you actually use your driveway or property, so you're not left guessing when you can park a car or open the garage again.
Cracking usually comes down to what's under the concrete rather than the concrete itself. We compact the base properly, use the right reinforcement for the job, and place control joints so the slab or driveway can move slightly as it cures without cracking randomly. Good drainage underneath and around the edges matters just as much, since water sitting against or under concrete is one of the main causes of long-term damage.
The quote covers site prep, formwork, reinforcement, the pour and the finish, laid out clearly before work starts. If ground conditions turn out to need extra work once we start digging, we'll tell you and confirm it with you before going ahead, rather than adding it on afterwards.
A plain or broom finish is a straightforward, practical surface suited to most driveways and slabs, with a light texture brushed into it for grip. Exposed aggregate goes a step further, treating the surface so the stone underneath is visible, which adds extra texture and grip and suits driveways, patios and pool surrounds where slip resistance matters more.
Concrete is generally firm enough to walk on within a few days, but it needs closer to four weeks to fully cure before regular vehicle use. We'll give you exact timeframes for your specific job once it's poured, so you know when it's safe to park, drive or set up furniture on it.
We plan the job around your access needs, especially where a driveway or garage slab is involved. Before we start, we'll tell you which days access will be limited and for how long, so you can plan around it rather than being caught out.
Yes. Site prep, formwork, reinforcement, the pour and the finishing are all handled by the same team, so you're not coordinating separate trades or chasing different people for updates.
Whether you need a new driveway in Frankston, a pool surround in Mount Eliza, a garage slab in Mornington or exposed aggregate finish anywhere across the Peninsula, we handle the concreting work from the first measure-up to the final finish. Get in touch for a straightforward, itemised quote and a clear timeframe for your job.
Fill in the form and we'll get back to you fast.